71 CELICA PROJECT
Posted: April 11th, 2010, 2:41 am
HI MY NAME IS ED HERE IS MY 71 CELICA PROJECT THAT I PURCHASED FROM A MEMBER OF THIS FORUM. I GOT THIS CAR AND IT HAD ABOUT 4 GALLONS OF BONDO ON THE WHOLE CAR FRONT TO BACK ON MOLDINGS. YOU NAME IT , IT HAD BONDO ON IT AND PRETTY BLASTED INTERIOR BUT I REALLY LOVE THESE CARS.
71 ST
GOT 20R MOTOR
5 SPEED BUT 5TH GEAR DONT WORK
SOME KIND OF LOWERING SPRINGS
FRONT STEERING LINKAGE HAD ALL BEEN REPLACED
FULL EXHAUST WITH A CHERRY BOMB MUFFLER
QUATER WINDOWS ALL JACKED UP WOULD NOT GO UP OR DOWN JUST FLOPPY
NO BRAKES AT ALL
MISSSIN A BUNCH OR RANDOM PARTS
NO RUST WHICH IS NICE
GOT SOME DENTS THO
NO FRONT BUMPER
IVE COME TO REALIZE WHAT PARTS ARE EXPENSIVE FOR THESE CARS (ALL OF THEM)
GOOD PROJECT BASE THO
HERE IS SOME PICS OF IT:
SO FAR IVE FIXED QUATER WINDOWS NEW BUSHING ROLLERS AND CRANK MECHANISMS
ITS GOT REALLY GOOD BRAKES NOW NEW BRAKE MASTER CYLINDER, IN REAR NEW WHEEL CYLINDERS IN FRONT NEW RUBBER LINES
GROUND OUT ALL BONDO DOWN TO BARE METAL
BETTER DRIVER DOOR
SWEET WHEELS
ENGINE BAY HARNESS HAD TO BE REMOVED AND UNWRAPPED BECAUSE IT WAS OF BRAKE FLUID AND VOLTS GAUGE WIRE WAS MELTED
AND A LOT MORE TRACKING DOWN OF PARTS
BUT THIS PROJECT HAS BEEN PUT ON HOLD DUE TO THIS CAR I GOT BOUT A WEEK AGO:
WHICH I GOT A HELLOF A DEAL ON
ITS A 71 CORONA MARK 2
CLEAN BODY
18R-U MOTOR
AUTO TRANNY
WORKING AC
PRETTY MUCH EVERYTHING WORKS ON IT AND AM CURRENTLY DRIVING
HERES SOME PICS OF IT:
71 ST
GOT 20R MOTOR
5 SPEED BUT 5TH GEAR DONT WORK
SOME KIND OF LOWERING SPRINGS
FRONT STEERING LINKAGE HAD ALL BEEN REPLACED
FULL EXHAUST WITH A CHERRY BOMB MUFFLER
QUATER WINDOWS ALL JACKED UP WOULD NOT GO UP OR DOWN JUST FLOPPY
NO BRAKES AT ALL
MISSSIN A BUNCH OR RANDOM PARTS
NO RUST WHICH IS NICE
GOT SOME DENTS THO
NO FRONT BUMPER
IVE COME TO REALIZE WHAT PARTS ARE EXPENSIVE FOR THESE CARS (ALL OF THEM)
GOOD PROJECT BASE THO
HERE IS SOME PICS OF IT:
SO FAR IVE FIXED QUATER WINDOWS NEW BUSHING ROLLERS AND CRANK MECHANISMS
ITS GOT REALLY GOOD BRAKES NOW NEW BRAKE MASTER CYLINDER, IN REAR NEW WHEEL CYLINDERS IN FRONT NEW RUBBER LINES
GROUND OUT ALL BONDO DOWN TO BARE METAL
BETTER DRIVER DOOR
SWEET WHEELS
ENGINE BAY HARNESS HAD TO BE REMOVED AND UNWRAPPED BECAUSE IT WAS OF BRAKE FLUID AND VOLTS GAUGE WIRE WAS MELTED
AND A LOT MORE TRACKING DOWN OF PARTS
BUT THIS PROJECT HAS BEEN PUT ON HOLD DUE TO THIS CAR I GOT BOUT A WEEK AGO:
WHICH I GOT A HELLOF A DEAL ON
ITS A 71 CORONA MARK 2
CLEAN BODY
18R-U MOTOR
AUTO TRANNY
WORKING AC
PRETTY MUCH EVERYTHING WORKS ON IT AND AM CURRENTLY DRIVING
HERES SOME PICS OF IT: