Welcome
Posted: February 18th, 2008, 7:23 pm
Hello, and welcome to my 1st Gen Celica forum.
I've owned a few 1st gen Celicas in my lifetime. I started out with an 18RG powered 1971. The 18RG was purchased from Cary Miller at Cary's Automotive. It was an efi model with a set of Webber 45's, HKS 304, 288 cams, electronic ignition, shorten strut casings for Tokiko shocks, TRD springs, AE86 Zenki LSD w/4.3 gears. Like most, I sold it thinking, I will shake off the Celica bug.
A year went by, I found myself with another 1st gen Celica. This time it was an immaculate red 1972. It wasn't long before I swapped the 18RC out for a 3TGTE. I used two Mitsubishi Starion intercoolers welded together, ct26, 7mge injectors, and a 22re ecu. It wasn't long before I had to look for a cap and rotor and I knew I would be paying big money for it. Long story short, I started researching a 3SGTE swap and after doing the math I figure it would be cheaper to go with an SR20DET. The 3TGTE in my 1972 Celica was replaced with an SR20DET out of a JDM S14 Nissan Silvia. I needed bigger brakes so I decided to use 1985 Cressida struts shorten for Tokiko's, AE86 Zenki LSD w/4.3 gears, 91 MR2 seats. It was a fun, fast street car. Again, I sold it thinking I can shake it off.
Another year went by, I ended up with a clean 1973 Celica and my most current 1st gen Celica. The idea was to build my '72 again but this time do a total restoration on the body but different things came up and I decided to go with an F20C because I always found myself in the higher RPM's when driving my SR20 Celica. Plus, how can I go wrong with a much lighter engine, revs up to 9K, and has a six speed transmission? I've had this car running since May of 2005 and I can honestly say I'm still not tired of driving it. I don't think I'll be selling this 1st gen Celica anytime soon because the Celica bug is now in my blood!!!
Again, welcome to 1stGenCelica.com. We are still working on some of the bugs, if there is any questions or suggestions please feel free to PM the Moderators or myself.
I've owned a few 1st gen Celicas in my lifetime. I started out with an 18RG powered 1971. The 18RG was purchased from Cary Miller at Cary's Automotive. It was an efi model with a set of Webber 45's, HKS 304, 288 cams, electronic ignition, shorten strut casings for Tokiko shocks, TRD springs, AE86 Zenki LSD w/4.3 gears. Like most, I sold it thinking, I will shake off the Celica bug.
A year went by, I found myself with another 1st gen Celica. This time it was an immaculate red 1972. It wasn't long before I swapped the 18RC out for a 3TGTE. I used two Mitsubishi Starion intercoolers welded together, ct26, 7mge injectors, and a 22re ecu. It wasn't long before I had to look for a cap and rotor and I knew I would be paying big money for it. Long story short, I started researching a 3SGTE swap and after doing the math I figure it would be cheaper to go with an SR20DET. The 3TGTE in my 1972 Celica was replaced with an SR20DET out of a JDM S14 Nissan Silvia. I needed bigger brakes so I decided to use 1985 Cressida struts shorten for Tokiko's, AE86 Zenki LSD w/4.3 gears, 91 MR2 seats. It was a fun, fast street car. Again, I sold it thinking I can shake it off.
Another year went by, I ended up with a clean 1973 Celica and my most current 1st gen Celica. The idea was to build my '72 again but this time do a total restoration on the body but different things came up and I decided to go with an F20C because I always found myself in the higher RPM's when driving my SR20 Celica. Plus, how can I go wrong with a much lighter engine, revs up to 9K, and has a six speed transmission? I've had this car running since May of 2005 and I can honestly say I'm still not tired of driving it. I don't think I'll be selling this 1st gen Celica anytime soon because the Celica bug is now in my blood!!!
Again, welcome to 1stGenCelica.com. We are still working on some of the bugs, if there is any questions or suggestions please feel free to PM the Moderators or myself.