New member with TA22

Please introduce yourself and Celica or ride(s).
Post Reply
Junsky
Posts: 2
Joined: January 8th, 2017, 11:32 am
Location: Finland

New member with TA22

Post by Junsky »

Hello,

My name is Juhani, I'm a newbie in here and I'm from Finland.

Currently working on a TA22 that is a mess. :banghead2: It should have been a "Easy Project", but it is Pretty poor patchwork of art and some rust problems.

Image

Some would have dispose it, but I'm going to finish it.

To mention some problem areas:

- Both front strut towers were toast and poorly patched:
Image

Image


Both door bottom were badly patched, had to weld these again:

Image

Also left quarter was replaced By someone and it was welded to wrong Place! :arg:

Something good:
- Boths sills were replaced and I think they are quite good.
- Frame underneath seams reasonable.

Image

Currently working on getting the trunk welded and to get the quarter welded in the right Place. Then it is the primer paint and bondo work to be done.


Anyways, good to be here and to have more knowledge from Early celicas.
Going to read other users Projects to get some motivation to work on my own. :D

BR, Juhani
KWP
Posts: 39
Joined: August 21st, 2016, 9:42 am
Location: Netherlands

Re: New member with TA22

Post by KWP »

Like youre attitude "im going to finish it"
Are you going for restoration or also some modifications?
Junsky
Posts: 2
Joined: January 8th, 2017, 11:32 am
Location: Finland

Re: New member with TA22

Post by Junsky »

Going to Retromod it with 16V 4A-GE and König Rewinds. So the usual way. Probaply blue or copper colour...
KWP
Posts: 39
Joined: August 21st, 2016, 9:42 am
Location: Netherlands

Re: New member with TA22

Post by KWP »

Nice, good luck with it
Post Reply